Using an Eloh Eliot Starlight skin – Basics 1

Eloh Eliot - Another Skin Resources for virtual worlds

This is the first part in a short series on how to use Eloh Eliot’s Starlight skin templates for virtual world avatars. Basics 1 covers downloading the template files and changing the skin tone.

Please read the below disclaimers first.

This is a Photoshop-based tutorial (CS3) produced on a Mac. There are similarities when using Gimp, so you can follow this tutorial as a general guide. I’m unable to offer detailed advice for Gimp as I haven’t used it.

This tutorial is just one method of making very basic changes to the skin templates. It doesn’t contain any advanced techniques on skin making (hand-painting, photo source, 3D baking etc.,).

All the Photoshop files used were designed and created by Eloh Eliot of Another Skin. These files are not my own work and I am not an experienced skin creator. I am unable to answer any detailed technical questions about how they were made. These files do come with a license agreement which I strongly recommend you read before you using them. MIT License

This might seem an obvious statement but for any readers who are not aware: the Starlight female avatar skins are depicted as anatomically correct. These tutorials are meant for a mature audience who are comfortable learning and working with anatomically correct template files.

Continue reading

Advertisements

Uploading an avatar skin to OpenSim

I decided to write this post after receiving a reader’s question on how to upload files to make into a completed skin in OpenSim. My reply included a description on how to do this, but I think it’s something that needs an expanded post.

I learned how to upload files and make a wearable skin in Second Life; it is one of those areas where an assumption is often made that everyone knows how to do it. To help those who haven’t put together an avatar skin before I’ve written this tutorial.

The same basic method applies for other grids and viewers (as far as I’m aware).

I’m using the Starlight skin .psd files made by Eloh Eliot and working in Photoshop CS3. For OpenSim I’m using the Imprudence viewer.

This tutorial is for people who have some Photoshop experience rather than the complete beginner.

Preparation

When you are happy with your skin and want to upload it take the following steps:

1. Check the image size of your Photoshop files. If they are set at 1024 by 1024 pixels you’ll need to resize them. You can upload this size but it will make a large file, which is not very efficient, and could be slow to rez in-world.

Resizing your skin files to 512 x 512

Resizing your skin files to 512 x 512 (Image 1)

2. In the Image Size dialog box resize the Face, Upper and Lower Body files to 512 x 512 pixels. (Image 1)

Then go to Save As and save the Face, Upper and Lower Body files as Targa (.tga) format. (Image 2)

Saving as Targa (Image 1)

Saving as Targa (Image 2)

The next dialog box to open will give you the choice of saving as 16, 24 or 32 bit (Image 3). To make sure that the Face file is uploaded with the transparency information, select the 32 bit option. You can save the Upper and Lower Body files as 24 bit – if you have not added any Alpha Channels when modifying the files.

Saving as Targa (Image 2)

Saving as Targa (Image 3)

Face/Head template files usually contain an Alpha Channel and only Targa (.tga) and Portable Network Graphic (.png) file formats are available in virtual worlds to recognise the transparency information. People also use the .png file format for saving skin files. I use Targa as that’s what I’m familiar with but it’s what works best for you.

3. You do not need to save your .psd files at the 512 x 512 image size. If you are using the original files, and not saved copies, I’d recommend against it. If you want to come back and make changes, or create a new skin, it is harder to do detailed work at this smaller size.

4. Now that your files are saved it is time to upload them. Login to your grid or region and find your favourite spot to do some appearance editing.

Uploading and making your new skin

1. Go to File, then the Upload menu, select Upload Image and choose the Face, Upper and Lower Body .tga (or .png) files. (Image 1)

Uploading your skin in OpenSim. Image 1

Uploading your skin in OpenSim. (Image 1)

Depending on your viewer, you can choose to do a preview of each file before you upload it. To look, go to the ‘Preview image as’ and then use the drop down menu to see the file as it will look on an avatar. (Image 2)

Uploading skin you skin in OpenSim. Image 2

Uploading skin you skin in OpenSim. (Image 2)

Those with free uploads, or viewers that have free temporary uploads, can skip the preview if you wish.  Once the files are uploaded they will be saved to your Textures folder.

2. The next step is to make a new skin. Open your Inventory window and go to Create, located at the top of the window. Select New Body Parts and then select New Skin. A new skin will appear in your Body Parts folder. Rename the skin as you choose, then double-click or Command click (Mac)/Right click (Windows) on the name to wear it. Don’t panic on finding that it is a default Ruth skin! The next steps should fix that.

3. When you’re wearing your new skin go to the Appearance window. Choose the Skin tab listed under Body Parts. (Image 3)

Making the skin in the Appearance window. Image 3

Making the skin in the Appearance window. (Image 3)

The Skin window will show three grey boxes with a black cross in them, on the left hand side next to the sliders. These are the Head, Upper Body and Lower Body Tattoos. This is where you will assign your uploaded skin files to the new skin you’re wearing.

Make sure you have the ‘Apply Immediately’ box ticked, so that you can see the files as they are applied to the skin. Click on the Head Tattoos box. Another window will open where you can look for the uploaded skin files in your Inventory. Find the Face upload, click on the name and then click on the Select button. Now the upload will appear in the Head Tattoos box and on your avatar skin.

Repeat the same process for the Upper and Lower Body boxes and then press Save. You will now be wearing your new skin with the uploaded files.

I hope that this will be of help. Enjoy your new skin!

Creating avatar skins – Part 2

In Part 1 of this series; I wrote about some of the options and guides for beginners to learn about creating an avatar skin. Part 2 moves on from that to cover a free resource: Eloh Eliot’s Another Skin templates.

Many people have heard of these and, indeed, there tends to be a general view that everyone knows what they are. If you are new to virtual worlds or have never tried your hand at creating then you probably won’t know about them. I was aware of the name for some time but didn’t know exactly what they were for about two years.

Eloh Eliot was (as far as I am aware) the first person from Second Life to create and then make freely available, complete, full body, female skin templates. Complete, in this context, means that they come with a base skin texture and shading/highlights on the face, upper and lower body. The head template has eyebrows, eyelashes and make-ups which are pre-prepared and all are fully modifiable and customisable.

They can be used, fairly easily and quickly, to create a skin to replace the Ruth avatar default you have in OpenSim. They can be a training resource for developing your own custom skin design and they are also available to be used commercially.

Eloh Eliot’s work is an amazing stand-out in the realm of free resources, not just because of the good, professional, quality of the work or for the amount of time she has put into making them convenient to use. Quite simply, no other creator at this time offers the same kind of flexibility in this particular area.

How do you use them?

If you visit the resource page for Another Skin you will find three female skins that are currently available to download. One of the older skins – Untitled, comes as layered Photoshop (.psd) files only. The two most recent skins, Starlight and Pleiades, are available for download in Photoshop (.psd) and Gimp (.xcf) file formats. Starlight is also available to download in Illustrator (.ai) file format.

Two of the skin generations listed are not available to download at this time (which, sadly, includes the experimental male skin mods).

The files all come with a license and I strongly recommend, out of courtesy to the creator, that you read them or visit the FAQ page to understand the required usage.

Once you have downloaded the files to your computer it is then entirely up to you how you modify them. If you want a straightforward female skin to replace your default avatar skin this can be easily achieved, usually within a few minutes for an intermediate/advanced user, in the graphics programme of your choice.

Whilst the site has no in-depth tutorials; it does give a guide on how to change the presets of the Starlight skin in its .psd format. This is helpful as, with this skin generation, you have a choice between 2 nose and mouth shapes as well as preset make-ups.

Other resources?

There is one other thing I’d like to cover about female skin templates, particularly as it is referred to on Eloh Eliot’s site. A similar resource for female skins did use to be available which were completely free and modifiable. They were also created by a Second Life resident, Sezmra Svarog, and called the Splendor skins.

Sezmra Svarog was originally a creator for her skin and clothing business called Nora. In 2008 she closed her business and made the Splendor skin templates, as layered Photoshop files and wearable skins, a free resource via her website and at a specific sim in Second Life.

Skipping forward to the present day – it appears that they are no longer available in those places (there is no reference to them in the creator’s Profile info either).

At the time of publishing this post; I do not have any information on why the Splendor skins are no longer available. It is entirely possible that the templates and skins that were created are still sold or distributed free of charge by other people.

*Update* 22/12/10 It appears that the Splendor skin.psd files are available to download from a resource website called ZeroTerminal.

ZeroTerminal also hosts downloads of the Eloh Eliot templates and mods of the skins, made or uploaded by site users, as well as other free resources. You do have to register with the website to login and download and it is aimed at Second Life residents.

I would like to point out that, personally, I haven’t registered to use this website. I don’t know the people who have set up this site and there doesn’t appear to be any information on their Second Life identities, real life details or any contact info, so please use your own judgement. A final caveat – to quote from a comment by one of the admins, GateOn: “Even though I watch out copyrights as much as I can, I don’t accept any responsibility for any item I am posting.”

Unfortunately, skin templates and their derivatives can be a subject that causes a huge amount of confusion (and some no small amount of drama at times). To assist with recognising the Splendor templates I’ve included an image of the Head .psd file and what Sezmra Svarog wrote about using them.

Splendor skin by Sezmra Svarog - Head template

Splendor skin by Sezmra Svarog - Head template

From the Read Me text included with the .psd files:

**You are free to use these files to create your own skins for your Second Life avatar, no matter what Grid you are using it on.

**You are free to alter these files to create your own skins in order to resell them.

**You are NOT encouraged to redistribute these files, commercially, as is.  Please don’t take advantage of others – it may return to haunt you.

I hope the above will be of use to anyone who does come across the Splendor files or skins for the first time.

In my next post I will be writing my very first tutorial on how to use the Another Skin – Starlight file in Photoshop, from download to uploading to OpenSim.